Universal 868 MHz 4-channel RF transmitter clone copy remote control FOB function garage door opener remote receiver receiver module relay
The gadget is a remote control with a wireless copy card with super copy & clone function, ultra-small error data copy code and reproducible oscillation.
It supports remote and wireless control of remote 100m (free space) rolling doors, garage doors and other equipment.
Bringing you a new remote control experience that will bring more convenience to your daily life.
You can\'t miss it.
* Double the existing drivers of the remote control: for example, vehicles with central locking system, control garage door access control system, electronic door, electronic control equipment, solar control drive ceiling, heating control system, light switch, etc.
* Strong privacy: ultra small data copy code errors and duplicate oscillating resistors. Your privacy is very strong.
* New copy function for remote control: Four buttons can be used to copy four different types of chips, which is a remote control that can be operated in four different types of devices. Data replication is faster and losing code is not easy.
* Easy to use: Easy to install and use, the 4-channel remote control system allows you to control your gadgets, cars and home or garage. Convenient. One-click smart copy support, high copy copying and efficient copying.
Widely used: Perfect for remote control equipment (short-range), etc. for electric control grids, retractable doors, garage doors, electric curtain cars, motorcycles, etc.
* Powerful performance combat (for the following remote control IC modules) supports the following response codes: 2260 (all manufacturers) 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010 , HT6012, HT6014, SMC918series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200 \\ HCS201 (partial code) HCS300 \\ HCS301 (partial code), a miniature Part of the computer chip, chip code, etc. (With this copier remote control you can clone all 868 MHz key card fixed code.
Use some of the remotes listed above. If you don\'t work with the copy to copy the appropriate one, you may have to Make sure your device has a chip).
Material: metal and PVC
Product Type: Universal 868 MHz RF Remote Control Transmitter
RF frequency: 868 MHz
Code corresponding to the next method: by face-to-face copying (one-to-one key copy).
Supported channels: four channels
Button: 4 buttons (A, B, C, D)
Power supply: 270mA / 12V battery (including battery
,Modulation system: ASK
Working voltage: DC12V
Working current: <25mA
Transmission distance: 100 meters (blank area)
Main item size: 6.0 * 3.0 * 1.5cm / 2.36 * 1.18 * 0.59in
The main product weight: 30g / 1.0oz
Packing size: 6.5 * 3.5 * 2.0 cm / 2.55 * 1.37 * 0.78in
Weight: 35 g / 1.23 oz
1. It can\'t copy the original car remote control, two-way remote control and remote rolling code (rolling code chip and HCS usually start like HCS200, HCS201, HCS300, HCS301, etc.)
2. We do not provide retail packaging, but we will pack it before shipping.
Our remote control code and learning code can be copied and fixed.
1. Clear the code:
When the button is pressed simultaneously with buttons A and B, the LED indicator will enter a flashing fast state, which means that all data in the memory is deleted (see video above). If the operation to clear the memory is unsuccessful, you can repeat the above steps.
2. Copy / face to face copy (one to one copy):
Then clear the memory, you can operate face-to-face copy (one-to-one copy), your left hand presses the original remote control, your right hand simultaneously press the remote control to copy; put the two remote controls as close as possible. For example, press the A button quickly 2, while the remote control, the LED indicator flashes, press the A button to remotely copy again, the LED indicator is long, which means that the remote single-button original code has been copied to the remote copy control. The other 3 buttons are the same operation.
Dear customers, please check the following instructions before purchasing; if you do not meet the conditions that have not been purchased, we will not accept returns:
For consumers, most customers want to replace the original remote with a normal remote control without developing such a remote control. You can configure the remote control within 2 seconds if the following three conditions are met:
Condition I: The original remote control can be used normally
Condition 2: The original remote control frequency is 433 Mhz
Condition 3: The original IC remote control model is 2262 2260 1527 2240, compatible with IC (remote scrolling code does not work).
Please confirm two things before purchase (first, frequency; second, chip code (encoder IC). (This is very, very important. Don\'t ignore them.) Don\'t think that the simple frequency is the same, then it can\'t be copied